topology2: production: cav2.5: Add sof-adl-rt711-l0-rt1316-l23-rt714-l1

[macchian]

The same configuration as
sof-mtl-rt711-l0-rt1316-l23-rt714-l1
sof-lnl-rt711-l0-rt1316-l23-rt714-l1

[lgirdwood]

@macchian assume validated on real HW ?

[macchian]

@macchian assume validated on real HW ?

@lgirdwood , it still needs to be verified. The request originates from #10805 .

[groxaxo]

Correction/superseded update: the earlier negative result was contaminated by a local snd_sof.tplg_filename=sof-hda-generic-2ch-pdm1.tplg override, but I have now disabled that override and rebooted.

The clean retest for this topology PR together with thesofproject/linux#5792 is still negative on Dynabook X30W-K / PDA31A: /sys/module/snd_sof/parameters/tplg_filename is now (null), no active modprobe file forces the topology, and the patched snd_soc_acpi_intel_match module plus attached topology are installed. However the current boot still selects skl_hda_dsp_generic, loads intel/sof-tplg/sof-hda-generic-2ch.tplg, exposes only sof-hda-dsp / skl_hda_dsp_generic, and /sys/bus/soundwire/devices is empty.

Full clean result is in the later comment: #10817 (comment)

[groxaxo]

Clean hardware retest after disabling the local topology override for this topology PR together with thesofproject/linux#5792.

Result: still negative on Dynabook X30W-K / PDA31A, but this is now a clean result. The old forced topology config is gone:

/etc/modprobe.d/99-sof-pdm1-topology.conf: not present
/sys/module/snd_sof/parameters/tplg_filename: (null)
/proc/cmdline: no audio/topology override
/etc/modprobe.d/*.conf: no active match for tplg_filename or sof-hda-generic-2ch-pdm1
/sys/module/snd_intel_dspcfg/parameters/dsp_driver: 3

The test bits are still installed:

modinfo snd_soc_acpi_intel_match
filename: /lib/modules/6.17.0-1023-oem/updates/snd-soc-acpi-intel-match.ko
srcversion: BA90D4B121EC96E6FCD3922

sha256sum /lib/firmware/intel/sof-tplg/sof-adl-rt711-l0-rt1316-l23-rt714-l1.tplg
962eeebf4171b57a2782c9e20533b8b16c2be99ec0cc62df6e9630f51ce8784e

Current boot still selects the HDA generic path, now without the old PDM1 override:

sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
sof-audio-pci-intel-tgl 0000:00:1f.3:  Topology file:     intel/sof-tplg/sof-hda-generic-2ch.tplg
sof-audio-pci-intel-tgl 0000:00:1f.3: loading topology: intel/sof-tplg/sof-hda-generic-2ch.tplg

/sys/bus/soundwire/devices is empty. ALSA/PipeWire still expose only sof-hda-dsp / skl_hda_dsp_generic devices, with the default sink still under alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic....

So the requested sof-adl-rt711-l0-rt1316-l23-rt714-l1.tplg is still not selected on this machine, and speaker audio remains unresolved. The earlier local override is no longer the explanation for the current result.